Tapered Roller Bearings
This conical geometry creates a linear contact patch which permits greater loads to be carried than with spherical (ball) bearings, which have point contact. The geometry means that the tangential speeds of the surfaces of each of the rollers are the same as their raceways along the whole length of the contact patch and no differential scrubbing occurs.
The U type tapered roller bearings are an exception within the conventional tapered roller bearings since this is a compact unit type that includes the grease and is pre-regulated without having to install an opposite bearing. Furthermore, they have a flange on the outer ring that is fastened axially in the application once the bearing is mounted.Two rows of rollers give these bearings load capacities over five times higher than comparably sized tapered-roller bearings. One-Way Locking Needle-Roller Bearing Clutches. The needles in these bearings roll freely in one direction, but lock to transmit torque when the rotation of the shaft is reversed.
- 33,338 mm x 76,2 mm x 28,575 mm NSK HM89444/HM89411 tapered roller bearings
- 1 Rib Outer Ring
- 0
- 25 mm x 47 mm x 15 mm NSK 25KW01 tapered roller bearings
- No Pilot
- 1.126 Inch | 28.6 Mi
- 16 mm x 47 mm x 21 mm NSK HM81649/HM81610 tapered roller bearings
- 0.59
- Mounted Units &
- 66,675 mm x 112,712 mm x 30,162 mm NSK 39590/39520 tapered roller bearings
- This product line wa
- 9.6 in
- 95 mm x 200 mm x 45 mm NSK 30319CA tapered roller bearings
- G 15x21x3
- 15 mm
- 31.75 mm x 72,626 mm x 29,997 mm NSK 3188/3120 tapered roller bearings
- Spherical Plain Bear
- 8483.30.80.55
- NSK 160KBE31+L tapered roller bearings
- 5.750 Kg
- 3.000 mm
- NSK 260KBE4401+L tapered roller bearings
- Angular Contact Ball
- Single Row | Angular
- 22,225 mm x 52,388 mm x 20,168 mm NSK 1380/1328 tapered roller bearings
- 4.724 Inch | 120 Mil
- 2.165 Inch | 55 Mill