Tapered Roller Bearings
This conical geometry creates a linear contact patch which permits greater loads to be carried than with spherical (ball) bearings, which have point contact. The geometry means that the tangential speeds of the surfaces of each of the rollers are the same as their raceways along the whole length of the contact patch and no differential scrubbing occurs.
The U type tapered roller bearings are an exception within the conventional tapered roller bearings since this is a compact unit type that includes the grease and is pre-regulated without having to install an opposite bearing. Furthermore, they have a flange on the outer ring that is fastened axially in the application once the bearing is mounted.Two rows of rollers give these bearings load capacities over five times higher than comparably sized tapered-roller bearings. One-Way Locking Needle-Roller Bearing Clutches. The needles in these bearings roll freely in one direction, but lock to transmit torque when the rotation of the shaft is reversed.
- 26,987 mm x 50,292 mm x 14,732 mm Timken L44649/L44610 tapered roller bearings
- BALDOR-RELIANCE
- 0.25
- 165,1 mm x 225,425 mm x 39,688 mm Timken 46790/46720 tapered roller bearings
- Bearing
- 1 Piece Solid
- 55 mm x 115 mm x 31 mm Timken JW5549/JW5510 tapered roller bearings
- Single Row Ball Bear
- 8482.10.50.68
- Timken L540049/L540010D+L540049XA tapered roller bearings
- 8483.20.40.40
- Concentric Collar
- 61,912 mm x 130,175 mm x 33,338 mm Timken HM911249/HM911210 tapered roller bearings
- 6.0
- Plain Spherical Rod
- 96,838 mm x 149,225 mm x 28,971 mm Timken 42381/42587B tapered roller bearings
- Pillow Block
- Double Row
- 30,112 mm x 62 mm x 20,638 mm Timken 15116/15245 tapered roller bearings
- Yes
- 1 Piece Solid
- 34,925 mm x 79,324 mm x 29,771 mm Timken 3482/3426 tapered roller bearings
- 31171530
- 8482.40.00.00