Tapered Roller Bearings
This conical geometry creates a linear contact patch which permits greater loads to be carried than with spherical (ball) bearings, which have point contact. The geometry means that the tangential speeds of the surfaces of each of the rollers are the same as their raceways along the whole length of the contact patch and no differential scrubbing occurs.
The U type tapered roller bearings are an exception within the conventional tapered roller bearings since this is a compact unit type that includes the grease and is pre-regulated without having to install an opposite bearing. Furthermore, they have a flange on the outer ring that is fastened axially in the application once the bearing is mounted.Two rows of rollers give these bearings load capacities over five times higher than comparably sized tapered-roller bearings. One-Way Locking Needle-Roller Bearing Clutches. The needles in these bearings roll freely in one direction, but lock to transmit torque when the rotation of the shaft is reversed.
- NACHI 300KBE030 tapered roller bearings
- 0
- Bearings
- 260 mm x 480 mm x 80 mm NACHI 30252 tapered roller bearings
- 2.0 in
- 013992032119
- 45.618 mm x 82.931 mm x 25.400 mm NACHI 25590/25523 tapered roller bearings
- ABB MOTORS AND MECHA
- N/A
- 70 mm x 150 mm x 37 mm NACHI QT31 tapered roller bearings
- Inch
- Contact with Flinger
- 95.250 mm x 150.000 mm x 36.322 mm NACHI 594/593X tapered roller bearings
- Set Screw
- Take Up Units
- 88.900 mm x 161.925 mm x 55.100 mm NACHI 6580R/6535 tapered roller bearings
- Sleeve Bearings
- 84833080
- NACHI 380KBE130 tapered roller bearings
- Flanged
- 3 Bolt Flange Bracke
- 68.263 mm x 136.525 mm x 41.275 mm NACHI H414245/H414210 tapered roller bearings
- 31171511
- Pillow Block Bearing