Tapered Roller Bearings
This conical geometry creates a linear contact patch which permits greater loads to be carried than with spherical (ball) bearings, which have point contact. The geometry means that the tangential speeds of the surfaces of each of the rollers are the same as their raceways along the whole length of the contact patch and no differential scrubbing occurs.
The U type tapered roller bearings are an exception within the conventional tapered roller bearings since this is a compact unit type that includes the grease and is pre-regulated without having to install an opposite bearing. Furthermore, they have a flange on the outer ring that is fastened axially in the application once the bearing is mounted.Two rows of rollers give these bearings load capacities over five times higher than comparably sized tapered-roller bearings. One-Way Locking Needle-Roller Bearing Clutches. The needles in these bearings roll freely in one direction, but lock to transmit torque when the rotation of the shaft is reversed.
- 136.350 mm x 224.600 mm x 57.150 mm NACHI 896/892 tapered roller bearings
- 0.197 Inch | 5 Milli
- Metric
- 60,325 mm x 100 mm x 25,4 mm FAG K28985-28921 tapered roller bearings
- N/A
- Take Up Units
- 38 mm x 63 mm x 17 mm FAG KJL69349-JL69310 tapered roller bearings
- Mounted Units &
- PT INTERNATIONAL
- 85 mm x 180 mm x 41 mm FAG 31317 tapered roller bearings
- 8865590637300
- PEER BEARING CO.
- 95 mm x 170 mm x 43 mm FAG 32219-XL tapered roller bearings
- 0782475987160
- 0.0
- 96,838 mm x 188,912 mm x 46,038 mm FAG K90381-90744 tapered roller bearings
- Tapered Roller Beari
- Bearing