Angular Contact Ball Bearings
Angular contact ball bearings have inner and outer ring raceways that are displaced relative to each other in the direction of the bearing axis. This means that these bearings are designed to accommodate combined loads, i.e. simultaneously acting radial and axial loads.
The axial load carrying capacity of angular contact ball bearings increases as the contact angle increases. The contact angle is defined as the angle between the line joining the points of contact of the ball and the raceways in the radial plane, along which the combined load is transmitted from one raceway to another, and a line perpendicular to the bearing axis.
Angular Contact Ball Bearings. Angular contact ball bearings support both radial and axial loads through asymmetric races that house the bearing's spherical rolling elements, also called bearing balls, on an angle. The deeper the angle between the bearing and its axis.
- 10 mm x 30 mm x 9 mm NSK 7200 A angular contact ball bearings
- 2.563 Inch | 65.09 M
- 2 Bolt Pillow Block;
- 300 mm x 420 mm x 56 mm NSK 7960BA angular contact ball bearings
- 5.1 mm
- 16.80 Kg
- 110 mm x 240 mm x 50 mm NSK 7322 A angular contact ball bearings
- 0,432 kN
- S695-2ZW5
- Timken 5309WG angular contact ball bearings
- 60 mm
- 6,500 rpm
- 17 mm x 47 mm x 22,22 mm Timken 5303K angular contact ball bearings
- 17 mm x 47 mm x 22,22 mm
- 176
- 100 mm x 180 mm x 34 mm Timken 7220WN MBR angular contact ball bearings
- 10900 1/min / Refere
- 14700 1/min / Limiti