Tapered Roller Bearings
This conical geometry creates a linear contact patch which permits greater loads to be carried than with spherical (ball) bearings, which have point contact. The geometry means that the tangential speeds of the surfaces of each of the rollers are the same as their raceways along the whole length of the contact patch and no differential scrubbing occurs.
The U type tapered roller bearings are an exception within the conventional tapered roller bearings since this is a compact unit type that includes the grease and is pre-regulated without having to install an opposite bearing. Furthermore, they have a flange on the outer ring that is fastened axially in the application once the bearing is mounted.Two rows of rollers give these bearings load capacities over five times higher than comparably sized tapered-roller bearings. One-Way Locking Needle-Roller Bearing Clutches. The needles in these bearings roll freely in one direction, but lock to transmit torque when the rotation of the shaft is reversed.
- NTN CRO-4606 tapered roller bearings
- 1.317
- 0800675110192
- NTN CRD-8044 tapered roller bearings
- Phenolic
- 0.63 Inch | 16 Milli
- NTN CRI-2416 tapered roller bearings
- Assembly; Standard P
- 2.47 Inch | 62.738 M
- NTN CRO-7901 tapered roller bearings
- 0.22
- 2-11/16 in
- NTN H244848TD/H244810A+A tapered roller bearings
- Light Series
- 3.0 in
- 51,592 mm x 88,9 mm x 22,225 mm NTN 4T-368S/362A tapered roller bearings
- Not Applicable
- IKO
- NTN CRD-2654 tapered roller bearings
- N/A
- M06110
- 50 mm x 105 mm x 29 mm NTN 4T-T7FC050 tapered roller bearings
- B00308
- PT INTERNATIONAL
- NTN E-LM654649/LM654610CD+A tapered roller bearings
- M06110
- Bearings