Tapered Roller Bearings
This conical geometry creates a linear contact patch which permits greater loads to be carried than with spherical (ball) bearings, which have point contact. The geometry means that the tangential speeds of the surfaces of each of the rollers are the same as their raceways along the whole length of the contact patch and no differential scrubbing occurs.
The U type tapered roller bearings are an exception within the conventional tapered roller bearings since this is a compact unit type that includes the grease and is pre-regulated without having to install an opposite bearing. Furthermore, they have a flange on the outer ring that is fastened axially in the application once the bearing is mounted.Two rows of rollers give these bearings load capacities over five times higher than comparably sized tapered-roller bearings. One-Way Locking Needle-Roller Bearing Clutches. The needles in these bearings roll freely in one direction, but lock to transmit torque when the rotation of the shaft is reversed.
- 280 mm x 500 mm x 80 mm NACHI 30256 tapered roller bearings
- 0883450307888
- 0.0
- NACHI 70KBE22 tapered roller bearings
- RHP BEARING
- 0
- NACHI 60KBE22 tapered roller bearings
- Clearance Seal
- REXNORD
- NACHI LM67048/LM67010 tapered roller bearings
- Steel
- Metric
- 220 mm x 460 mm x 145 mm NACHI 32344 tapered roller bearings
- No Pilot
- 1/2 Inch
- 75 mm x 130 mm x 25 mm NACHI E30215J tapered roller bearings
- Bearing
- ISOSTATIC
- 20 mm x 47 mm x 18 mm NACHI 32204 tapered roller bearings
- PT INTERNATIONAL
- M06110
- 63.500 mm x 112.713 mm x 30.048 mm NACHI 3982/3920 tapered roller bearings
- 90042
- 8482.20.00.00
- 45 mm x 75 mm x 20 mm NACHI E32009J tapered roller bearings
- BEARINGS LIMITED
- M06110