Tapered Roller Bearings
This conical geometry creates a linear contact patch which permits greater loads to be carried than with spherical (ball) bearings, which have point contact. The geometry means that the tangential speeds of the surfaces of each of the rollers are the same as their raceways along the whole length of the contact patch and no differential scrubbing occurs.
The U type tapered roller bearings are an exception within the conventional tapered roller bearings since this is a compact unit type that includes the grease and is pre-regulated without having to install an opposite bearing. Furthermore, they have a flange on the outer ring that is fastened axially in the application once the bearing is mounted.Two rows of rollers give these bearings load capacities over five times higher than comparably sized tapered-roller bearings. One-Way Locking Needle-Roller Bearing Clutches. The needles in these bearings roll freely in one direction, but lock to transmit torque when the rotation of the shaft is reversed.
- FAG 32021-X-N11CA tapered roller bearings
- 2.82 in
- 170000 lb
- 95,25 mm x 152,4 mm x 36,322 mm FAG K594-A-592-A tapered roller bearings
- 1 Piece Solid
- Metric
- 140 mm x 250 mm x 42 mm FAG 30228-XL tapered roller bearings
- 0.015 kg
- 18 mm
- 41,275 mm x 87,313 mm x 30,886 mm FAG K3585-3525 tapered roller bearings
- Mounted Units &
- 0.0
- 150 mm x 270 mm x 45 mm FAG 30230-XL tapered roller bearings
- CONSOLIDATED BEARING
- N/A
- 55 mm x 100 mm x 25 mm FAG 32211-A tapered roller bearings
- Cam Follower and Tra
- 0.787 Inch | 20 Mill
- FAG 31330-X-N11CA-A180-230 tapered roller bearings
- 31171531
- B04270
- 75,987 mm x 131,975 mm x 39 mm FAG KHM215249-HM215210 tapered roller bearings
- 5.53 Inch | 140.462
- M06288
- 101,6 mm x 168,275 mm x 41,275 mm ISB 687/672 tapered roller bearings
- No
- 2 Rib Outer Ring | S
