Tapered Roller Bearings
This conical geometry creates a linear contact patch which permits greater loads to be carried than with spherical (ball) bearings, which have point contact. The geometry means that the tangential speeds of the surfaces of each of the rollers are the same as their raceways along the whole length of the contact patch and no differential scrubbing occurs.
The U type tapered roller bearings are an exception within the conventional tapered roller bearings since this is a compact unit type that includes the grease and is pre-regulated without having to install an opposite bearing. Furthermore, they have a flange on the outer ring that is fastened axially in the application once the bearing is mounted.Two rows of rollers give these bearings load capacities over five times higher than comparably sized tapered-roller bearings. One-Way Locking Needle-Roller Bearing Clutches. The needles in these bearings roll freely in one direction, but lock to transmit torque when the rotation of the shaft is reversed.
- 32 mm x 75 mm x 28 mm NTN 323/32 tapered roller bearings
- 4547359181999
- No
- NTN E-CR0-8205 tapered roller bearings
- 0.0
- 0.317
- NTN CRD-6804 tapered roller bearings
- 7.239
- 0087796022379
- 28,575 mm x 60,325 mm x 17,462 mm NTN 4T-15590/15523 tapered roller bearings
- 31171512
- 0644075078719
- 300 mm x 460 mm x 118 mm NTN 323060 tapered roller bearings
- 1.929 Inch | 49 Mill
- C3-Loose
- NTN CRO-8103 tapered roller bearings
- 2 Bolt Pillow Block
- 023342
- 28,575 mm x 64,292 mm x 21,433 mm NTN 4T-M86647/M86610 tapered roller bearings
- 4 Bolt Square Flange
- TIMKEN
- 76,2 mm x 133,35 mm x 39,688 mm NTN 4T-HM516442/HM516410 tapered roller bearings
- REGAL BELOIT
- SYSTEM PLAST
- NTN 30332UDF tapered roller bearings
- Yes
- 0883450039512
- NTN 32026XUDF tapered roller bearings
- N/A
- 4.082
- 31,75 mm x 62 mm x 19,05 mm NTN 4T-15123/15245 tapered roller bearings
- PT INTERNATIONAL
- M06110