Self Aligning Ball Bearings
This type of ball bearing is recommended when alignment of the shaft and housing is difficult and the shaft may flex. The outer ring has a spherical raceway and its center of curvature coincides with that of the bearing; therefore, the axis of the inner ring, balls and cage can deflect to some extent around the bearing.
Self-aligning ball bearings have two rows of balls, a common sphered raceway in the outer ring and two deep uninterrupted raceway grooves in the inner ring. They are available open or sealed. The bearings are insensitive to angular misalignment of the shaft relative to the housing , which can be caused, for example, by shaft deflection.Self-aligning ball bearings Designed to handle misalignment MRC self-aligning bearings have two rows of balls with a common sphered raceway in the outer ring. This gives the bearings their self-aligning property, permitting angular misalignment of the shaft relative to the housing.
- Toyana 1308 self aligning ball bearings
- 26 mm
- Sealed
- Toyana 2305K+H2305 self aligning ball bearings
- Steel
- MBL 28
- Toyana 1304 self aligning ball bearings
- 2000
- 1 in
- Toyana 1206 self aligning ball bearings
- -40 to +225 &de
- 9110 lb
- Toyana 1310 self aligning ball bearings
- C0
- 15150 lbf
- 60 mm x 130 mm x 46 mm ISO 2312K self aligning ball bearings
- Steel
- 053893095493
- 55 mm x 140 mm x 40 mm ISO 1411 self aligning ball bearings
- Nylon
- 210 Series
- 50 mm x 90 mm x 23 mm ISO 2210K self aligning ball bearings
- Maximum of +450
- Single Seal
- 35 mm x 72 mm x 23 mm ISO 2207K-2RS self aligning ball bearings
- 28.6 mm
- Click here
- 40 mm x 80 mm x 18 mm ISO 1208K self aligning ball bearings
- Four-Bolt Flange
- 1.5000 in