Self Aligning Ball Bearings
This type of ball bearing is recommended when alignment of the shaft and housing is difficult and the shaft may flex. The outer ring has a spherical raceway and its center of curvature coincides with that of the bearing; therefore, the axis of the inner ring, balls and cage can deflect to some extent around the bearing.
Self-aligning ball bearings have two rows of balls, a common sphered raceway in the outer ring and two deep uninterrupted raceway grooves in the inner ring. They are available open or sealed. The bearings are insensitive to angular misalignment of the shaft relative to the housing , which can be caused, for example, by shaft deflection.Self-aligning ball bearings Designed to handle misalignment MRC self-aligning bearings have two rows of balls with a common sphered raceway in the outer ring. This gives the bearings their self-aligning property, permitting angular misalignment of the shaft relative to the housing.
- 20 mm x 47 mm x 14 mm NSK 1204 self aligning ball bearings
- 20 mm x 47 mm x 14 mm
- 55 mm x 120 mm x 43 mm NSK 2311 self aligning ball bearings
- Right Hand
- 0.3750 in
- 50 mm x 110 mm x 27 mm NACHI 1310K self aligning ball bearings
- 1-11/16 in
- Plain Sleeve
- 50 mm x 90 mm x 20 mm NACHI 1210 self aligning ball bearings
- Single Row Non-Fill
- 54000 N
- 20 mm x 52 mm x 15 mm NACHI 1304K self aligning ball bearings
- 1.1250 in
- Oxide
- 65 mm x 140 mm x 48 mm FAG 2313-K-TVH-C3 + H2313 self aligning ball bearings
- 5.5000 in
- Stainless Steel
- 60 mm x 110 mm x 28 mm FAG 2212-K-TVH-C3 + H312 self aligning ball bearings
- Set Screw
- 1080 lbf
- 110 mm x 240 mm x 50 mm FAG 1322-M self aligning ball bearings
- ±0.001 in
- +0.005/-0.
- 85 mm x 150 mm x 36 mm FAG 2217-M self aligning ball bearings
- 125 mm
- Tapered 1:12
- 60 mm x 110 mm x 22 mm FAG 1212-TVH self aligning ball bearings
- Round
- Rubberized